No credit for design! All credit goes to the creator in the link below!https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder/files Works great with EDC Bed Scraper UPGRADED and the Miniscraper! I also added a compressed knob file here:https://www.thingiverse.com/thing:6590805 The Compressed knob file will...
ENGLISH This simple clamp can be used to keep two boards at a right angle while the assembly is curing. I posted an all-in-one STL including the four parts and a 0.2mm height adhesion brim. And of course all parts as individual STL's. No supports are required. I suggest a filling of 20% to 50%. Additional hardware required : M8...
We designed these desk shelf legs generatively in Fusion 360 and produced them with SLS using the Sintratec S3 printer and robust PA12 nylon material. After printing and cleaning, we simply screwed the legs onto a wooden board and voilà: DIY Tabletop. Watch the video here: https://youtu.be/xUD6CZn9Ofc We printed version 2, but...
This is an angle iron end-cap for metal shelving. Fits angle iron that is .062 in (1.57mm) thick and 1.25 in (31.75mm) long on each leg. Designed to fit tight so it won't fall off.
Self-draining soap holder for bathroom or kitchen.
Clamp to mount power strips/boards under desks non-destructively (instead of using a mount that screws into the desk). Helps to organise computer cables, particularly for standing desks. Adjustable width to fit a variety of power strip sizes. Features: Fits desks up to: --- Regular size: 25 mm/1 inch thick --- Large size: 50...
cross-posted from: https://lemm.ee/post/27620066...
cross-posted from: https://lemm.ee/post/27376719...
T-nuts for 2020 Alu profiles with I-type groove (5mm wide) Hole needs to be threaded
Food bag hanger to help you organize your kitchen and take advantage of the top space from your shelves. No supports needed.
Cabinet Door Organizer, Organized storage for pan lids Dolap içi Kapak Düzenleyici (tr)
Quick Release - V mount. Snaps in automatically and holds securely. Release latch & spring is printed in place and holds with tension when the plate is inserted. No additional screws/parts needed. The optional bottom of the mount protects the printed springs and can be glued to the base.
